Back to Overview

What aspects should be paid attention to when installing windows?

Jul 26,2024

Windows in the home have been installed for a long time, and their sealing strips may cause different aging conditions. So how do we replace the window sealing strips?Next, Xiaobian will briefly introduce and analyze it to you.

1. How to replace the sealing strip of the window

We use tools such as knives to remove the old sealing strip, then wipe off the dust in the groove, and finally align the new sealing strip with the groove and press it into the groove. When installing the sealing strip, we need to be careful not to pull the sealing strip too tightly. Before cutting the bead and pressing it into the notch, a length of 1 to 2 cm needs to be set aside at both ends of the rubber strip.

2. What aspects should be paid attention to when installing windows?

1.Before installing windows, we need to check them. For example, whether the specifications, models and materials of the windows are consistent with the previously scheduled ones; check whether the windows have scratches, cracks and other problems during transportation.Before installing the window, everyone should check whether the window frame is horizontal and vertical, so as not to affect the installation effect of the window.

2. When installing windows, it is best to paint anticorrosive materials around the windows. The gap between the window frame and the wall can be filled with professional knowledge filling materials such as styrofoam. You should try your best not to use the cement mortar system for data filling during use.When installing windows, we must do a good job in the sealing design of the windows in time. You can use sealants, sealing strips and other materials to seal the gaps in the windows.

3.After the windows are installed, don't forget to check the windows. For example, we can check whether the window is firmly fixed, and use tools such as a ruler to check whether it is flat. You can also open and close the window to check whether the switch is smooth. After installation, the remaining sealant on the window must be removed.